Mounting Options - Kichler Spyn LED 52 Manuel D'utilisation

MOUNTING OPTIONS

If there isn't an existing UL (cUL for Canadian Installation) listed
mounting box, then read the following instructions. Disconnect the
Secure the outlet box directly to the building structure. Use
appropriate fasteners and building materials. The outlet box and its
support must be able to fully support the moving weight of the fan
(at least 50 lbs). Do not use plastic outlet boxes.
box.
NOTE: If you are installing the ceiling fan on a sloped (vaulted)
ceiling, you may need a longer downrod to maintain proper
clearance between the tip of the blade and the ceiling. A minimum
clearance of 12" is suggested for optimal operation.
NOTE: Depending on the location you have selected for installation,
you may need to purchase and install a "Joist Hanger" for the
support of the outlet box. Make sure the joist hanger you purchase
has been designed for use with ceiling fans. (Fig. 4)
6
Outlet box
Fig. 1
ANGLED CEILING
Provide strong
MAXIMUM 20° ANGLE
support
Recessed
outlet box
Ceiling
mounting
plane
Fig. 3
Outlet box
Fig. 2
Outlet box
Fig. 4