Operating Instructions - Kichler Spyn LED 52 Manuel D'utilisation

OPERATING INSTRUCTIONS

Restore power to ceiling fan and test for proper operation.
1. Fan Control: To start the fan. Slide the selected speed switch to run the fan at the desired
speed:(Fig.24)
1 - High speed;
2 - Medium speed;
3 - Medium-high speed;
4 - Low speed;
2. Light Control: Slide to turn the light on or o , and light dimming.(Fig.24)
3. Reverse Switch: Controls direction, forward or reverse.(Fig.25)
Your fan is shipped from the factory with the reversing switch positioned to circulate air
downward. If airflow is desired in opposite direction, turn the fan o and wait for the blades
to stop running. then slide the reversing switch to the opposite position, and turn the fan on
again. The fan blades will turn in the opposite direction and reverse the airflow.
Your New Kichler Ceiling Fan is now ready to use. Remember to RESTORE all power.
16
4
3
2
1
Fig. 24
Reverse Switch
Fig. 25