Depaepe Telecom 23052011 Mode D'emploi page 35

DATE & TIME:
The user can set the date and time on the base,
Press
Press
The last two digits of the Year will be blinking on LCD showing as
"20_ _".
Press or
Press
Then DATE & TIME will show on the LCD, enter the desired
DATE/TIME by
position.
The setting will be saved by pressing
once the setting succeeds.
Note: The time and date will be automatically set when the first Caller ID
message is received. This function depends on the local Telecom operator
supporting the service.
MODIFY PIN:
This function allows the user to change the pin code (this code is used just
for entering MENU section).
The Ex-factory default value will be (0000) 4 digit codes
Press
Press
The user will be invited to enter the current pin code.
Press
The user will be invited to enter a new pin code
Press
The user will be invited to repeat the new pin code.
Press
succeeds.
Note: once the new password is stored, please remember it. Forgetting it,
you would not allow you to enter menu section.
key and use
key to enter.
key to enter the desired year.
key to confirm.
or key when they blink on the corresponding
key, then use
key to enter.
key to confirm.
key to confirm.
key to confirm, a sound will be heard once the setting
or key to select "DATE & TIME",
or key to select "MODIFY PIN" item.
35
key, a sound will be heard