General Note - Akrapovic Slip-On Instructions D'installation

www.akrapovic.com
NOISE AND EMISSION WARNINGS
General warning
Because of the world-wide distribution of Akrapovič d.d. products, neither Akrapovič d.d. nor any of its subsidiaries
make any representation that the exhaust system complies with the air and/or noise emissions laws, or labeling laws,
of any jurisdiction. The purchasers are entirely responsible for informing themselves of the applicable laws where the
products are to be used and to comply with those law.
Although legal compliance of Akrapovič products in a specific country should be determined by the user, you can
find some basic guidance on compliance of your Akrapovič exhaust system with various legal requirements on the
product-related part of our website (please use the QR code on the front page or look for the respective product page
on www.akrapovic.com). For EC and ECE type approvals, please refer to the certificate enclosed to your product.
USA WARNING
Various U.S. states and the U.S. federal government have individual laws regulating the use of aftermarket exhaust
parts and systems, especially as those parts and systems modify, remove, or replace original equipment catalysts.
Please consult the appropriate laws in your area before installing any aftermarket part or system on your vehicle to
ensure compliance with all applicable laws. Neither Akrapovic d.d. nor any of their subsidiaries or the sellers of the parts
or systems make any representation that any of their parts or systems comply with any such laws.
CALIFORNIA WARNING
California laws prohibit the use of any aftermarket exhaust part or system that modifies, removes or replaces original
equipment catalysts unless the California Air Resources Board has issued an Executive Order regarding such part or
system or unless the part or system is exempted by being used only on racing vehicles on closed courses. Neither
Akrapovic d.d. nor any of their subsidiaries make any representation that any of their parts or systems has received such
an Executive Order or that any of their parts or systems conform with the racing vehicles exemption. The purchasers are
entirely responsible for informing themselves of applicable California laws and to comply with those laws.

GENERAL NOTE

Photographs and other illustrations in this manual are symbolic and are intended to help represent individual steps
for proper installation and use, as well as for a general overview. The actual component parts of the Akrapovič
exhaust system may not entirely correspond to the photographs and other illustrations.
SYMBOLS
The following symbols are used throughout these installation instructions:
TOOLS AND PROTECTIVE
EQUIPMENT REQUIRED
LUBRICATION
INSTALLATION TIP
USE BOLT SEALANT
Apply 3 to 4 small drops of bolt sealant onto the cleaned and degreased threads before tightening the
bolts.
WARNING! Avoid contact with skin, eyes and mucous membranes. Do not inhale fumes. Keep
out of reach of children.
USE ANTI-SEIZE LEAD-FREE COPPER PASTE (black tube)
Provides trouble-free and long-lasting protection against seizing, corrosion and rusting of bolts,
threaded ends, nuts, joints, etc. Also protects against vibration, wear and impact.
WARNING! Avoid eye contact. Keep out of reach of children.
USE ANTI-SEIZING GREASE (white tube)
Prevents seizing, corrosion and excessive wear between the titanium components of your exhaust
system.
WARNING! Avoid eye contact. Keep out of reach of children.
TIGHTENING TORQUE
HAND TIGHTEN
CAUTION OR IMPORTANT
4 / 20