Akrapovic Slip-On Instructions D'installation page 10

www.akrapovic.com
INSTALLATION OF THE AKRAPOVIČ SLIP-ON EXHAUST SYSTEM:
1. Coat the bolt and interior of the metal clamp with Akrapovič antiseize lead-free copper paste (black tube) and
correctly install it onto the link pipe (Figure 8).
IMPORTANT: use anti-seize copper paste on bolt threads and interior of the metal clamp!
2. Coat the bolt and interior of the metal clamp with spring hook whit Akrapovič anti-seize lead-free copper paste
(black tube) and correctly install it onto the stock collector. Hand tighten the bolt (Figure 9, 10).
IMPORTANT: use anti-seize copper paste on bolt threads and interior of the metal clamp!
Figure 8
Figure 9
10 / 20