Publicité
Les langues disponibles
Les langues disponibles
INTERCOMMUNICATING FUNCTION AMONG DIFFERENT USERS
1
Go to the monitor which has to be set as caller ('a'
monitor).
By pressing the door opener button, release the
handset. The monitor 'a' beeps two
order to indicate the access to the programming.
Leave the handset of the monitor "A" off-hook
until the programming is over
2
Press the button which has to be set; the monitor
produces two confi rmation beeps. The button can
•
be "
", "A" or "B".
3
Go to the user who has to call that button
as user 'b' and press the door opener button.
Monitors produce a beep in order to confi rm
the programming. Or go to a call station and
press the call button of the user 'b'; the
monitor set as 'a' beeps in order to confi rm
the programming. Contemporaneously with this
operation, the monitors of the user 'b' ring. Ignore
this call.
4
Re-hook the handset of the monitor 'a' producing two beeps indicating the exit from the programming.
5
Verify the function already set: release the handset of the monitor 'a' and press the button set. Verify
the ring of all monitors of the user 'b'; release the handset of a monitor 'b' and verify the possibility to
communicate to the monitor 'a'.
6
If you also want to do the reverse call, it is also necessary to program the monitor 'b' to call 'a'.
•
the button "
", even if it is already set with the intercommunicating function, it does not lose the auto-
activation functions, video switching and video transfer, because they are done with the handset hooked
up.
14
Monitor 'a'
times in
Monitor 'a'
Monitor 'b'
INTERCOMMUNICATING FUNCTION IN THE SAME FLAT
1
Go to the monitor which has to be set as caller
(monitor 'c1').
2
Pressing the door opener button, release the
handset. The monitor "c1" produces a tone
in order to indicate the access to buttons
programming. Leave the handset of the monitor
"A" off-hook until the programming is over
3
Press the button which has to be set; the monitor
'c1' produces two confi rmation beeps. The button
•
can be "
" or "A" or "B".
4
Go to the monitor which has to call that button
(monitor 'c2') and press the door opener button.
The monitors 'c1' and 'c2' produce two beeps
confi rming the programming.
5
Re-hook the handset of the monitor 'c1' producing two beeps indicating the exit from the programming.
6
Verify the function already set: release the handset of the monitor 'c1' and press the set button. Verify
the ring of the monitor 'c2', release the handset and verify the possibility to communicate to the monitor
'c1'.
7
If you also want to do the reverse call, it is also necessary to set the monitor 'c2' in order to call 'c1'.
•
the button "
", even if it is already set with the intercommunicating function, it does not lose the auto-
activation functions, video switching and video transfer, because they are done with the handset hooked
up.
012175868.00
012175868.00
Monitor 'c1'
Monitor 'c1'
Monitor 'c2'
15
Publicité
