ABB M22301 Serie Mode D'emploi page 39

ABB-Welcome M
Mounted on the wall
1. Fix the bottom of the device to the wall.
2. Latch the upper part of the device onto its bottom part.; place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp.
Mounted with flush-mounted box
1. Fix the bottom of the device to the existing flush-mounted box.
2. Latch the upper part of the device onto its bottom part;place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp.
|
Mounting / Installation
— 38 —