Klarstein MAXFLOW SMART Mode D'emploi page 21

Setting the oscillation mode of the fan flaps
• Switch on the device and press the SWING (left/right) key to activate the
oscillation mode (left/right). The SWING (left/right) indicator lights up. The fan
blades move to the right and left to direct the airflow to the right and left. Press the
SWING (left/right) key again to stop the oscillation mode, the indicator light goes
out.
• Switch on the unit and press the SWING (up/down) key to activate the oscillation
mode (up/down). The SWING (up/down) indicator lights up. The fan flaps move
to the right and left to direct the airflow to the right and left. Press the SWING (up/
down) key again to stop the swing mode, the indicator light will go off.
Setting the wind mode
Turn on the unit, the unit will start in normal mode. Press SPEED key to set the speed
manually.
• Press the SLEEP key to activate the sleep mode, the SLEEP indicator lights up. In
sleep mode, press the SPEED key to adjust the speed. Press the SLEEP key again to
exit the sleep mode.
• Press the NATURAL key to activate the natural mode, the corresponding indicator
lights up. In natural mode, press the SPEED key to adjust the speed. Press the
NATURAL key again to exit the natural mode.
• Press the SUPER key to activate the super wind mode, the associated indicator lights
up and the fan blows at the highest and strongest level. Press the SUPER key again
to exit the Super Wind mode.
EN
21