Kalorik FT 43140 BK Mode D'emploi page 9

Fax +32 2 359 95 50

Airfry the potato sticks according to the instructions above. For best results,
do not fry more than 1.2 lb. of fries per batch.
SETTINGS
The table below will help you select the basic settings for the ingredients
you want to prepare.
Note: Keep in mind that these settings are suggestions.
Tips:
Any food that can be prepared in a traditional oven can also be
-
prepared in the airfryer.
Shaking smaller ingredients halfway through the preparation time
-
optimizes the end result and can help prevent unevenly air-fried food.
A larger amount of ingredients only requires a slightly longer preparation
-
time, a smaller amount of ingredients only requires a slightly shorter
preparation time.
Shaking smaller ingredients halfway through the preparation time
-
optimizes the end result and can help prevent unevenly fried food.
If some foodstuffs tend to stick at the bottom of the basket, think to add
-
some cooking oil spray in the basket prior to adding the ingredients to
cook.
Do not prepare very greasy ingredients, such as sausages, in the airfryer
-
as the grease could catch fire.
Add some oil to fresh potatoes for a crispy result. Fry your ingredients in
-
the airfryer within a few minutes after you add the oil.
The optimal amount for preparing crispy fries is 500 grams / 1.2lb
-
Use pre-made dough to prepare filled snacks quickly and easily. Pre-
-
made dough also requires a shorter preparation time than home-made
dough.
Place a baking tin or oven dish in the airfryer basket if you want to bake
-
a cake or quiche or if you want to fry fragile or filled ingredients.
You can also use the airfryer to reheat food. To reheat ingredients, set the
-
temperature to 290
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you keep
the good numbering when you turn the pages of the I/B.
Don't change the page numbering. Keep the language
integrity. Print only what is inside the frame.
℉
for up to 10 minutes.
9
Assembly page 9/44
FT 43140 - 120501