Dimplex XHD28L Manuel Du Propriétaire page 8

Installation
Mounting
1.
If applicable, carefully pour and
evenly distribute the supplied media
in the media tray of the firebox.
Media
Tray
8
2a.
If installing into a Dimplex mantel,
first check to see if there are holes
in the side panels near the top as
shown below. If so, align the front
of the firebox (without front glass
installed) with the front face of the
mantel. Install provided screws
into the front holes on the inside
faces of the firebox. The screw will
line up with the hole in the mantel,
securing it in place.
Holes in
side panels
www.dimplex.com