Dimplex XHD28L Manuel Du Propriétaire page 11

Operation
Icon Function
A
Power
B
Heat
C
Temp
Dimplex Fireplace XHD28L/XHD28G / XHD26L/XHD26G / XHD23L/XHD23G
Description
Press to turn unit Off or On.
• Unit Off
Press to turn everything Off. Press again to
turn unit On with previous settings.
• Unit On
Press to turn unit On with previous settings.
- If the flame effect was On, the flame will
turn on and the previous heat setting will
be activated (On or Off). Display will show
current heater temperature setting and after
2 sec displays the room temperature.
- [remote only] If the flame effect was Off,
the previous heat setting will be activated
(On or Off).
- [panel only] If the flame effect was Off, the
flame will turn on and the previous heat
setting will be activated (On or Off)
• Heat On
Press to turn heat On (indicated by 1 short
beep). Display will show current heater
temperature setting and after 2 sec displays
room temperature. Use the Temp icon to
change the heater temperature setting.
• Heat Off
Press to turn heat Off (indicated by 1 short
beep).
NOTE: After the heater is switched off, the fan will
continue on for 60 seconds before turning off.
Press multiple times to raise the heater
temperature in 1
will show current temperature. Temperature
range is 62 -78
o o
This feature is active whenever the heat is
enabled.
F (1 C) increments. Display
o o
F (17 -26 C).
o o
11