Oven Light; Troubleshooting - Whirlpool WFG745H0FS Instructions D'utilisation

Masquer les pouces Voir aussi pour WFG745H0FS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the OFF position.
To Replace:
1. Unplug range or disconnect power.
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service
call, refer to the warranty page in this manual and scan the code there with your mobile device, or visit http://www.whirlpool.com/
product_help. In Canada, visit http://www.whirlpool.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
Problem
Possible Causes and/or Solutions
Nothing will operate
Power supply cord is unplugged: Plug into a grounded 3 prong outlet.
Household fuse is blown or a circuit breaker is tripped: Replace the fuse or reset the circuit breaker.
If the problem continues, call an electrician.
Main or regulator gas shutoff valve is in the OFF position: See the Installation Instructions.
The range is improperly connected to the gas supply: Contact a trained repair specialist or see
Installation Instructions.
Surface burners
The control knob is not set correctly: Push in knob before turning to a setting.
will not operate
Air in the gas lines: If this is the first time the surface burners have been used, turn on any one of the
surface burner knobs to release air from the gas lines.
Clogged burner ports: See "Sealed Surface Burners" section.
Surface burner
Clogged burner ports: See "Sealed Surface Burners" section.
flames are uneven,
Burner caps positioned improperly: See "Sealed Surface Burners" section.
yellow, and/or noisy
Range converted improperly: If propane gas is being used, contact a service technician or see the
"Warranty" section for contact information.
Excessive heat
Cookware that is not the proper size: The cookware should be centered above the burner with the bottom
around cookware
sitting level on the grate. The flame should be adjusted so that it does not extend up the sides of the pan.
on cooktop
Cooktop cooking
Improper cookware: Ideal cookware should have a flat bottom, straight sides, and a well-fitting lid, and the
results not
material should be of a medium-to-heavy thickness.
what expected
Control knob set to incorrect heat level: See "Cooktop" section.
Range is not level: Level the range. See the Installation Instructions.
16

Oven Light

TROUBLESHOOTING

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.
In Canada:
Whirlpool Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7

Publicité

Chapitres

Table des Matières
loading

Table des Matières