Velux KLA S105 Mode D'emploi page 7

Step 2: Interface B
5
Press to highlight "Register products".
Press "Enter" to confirm your choice.
6
Automatic registration is running. Please wait.
The registration can take up to one minute.
7
The display shows that a new remote control
has been identified and that the system was
succesfully copied.
H Select products
The products to be controlled via the inter-
face must now be selected.
1
Press to highlight "Select products".
Press "Enter" to confirm your choice.
2
Press to highlight "Create list".
Press "Enter" to confirm your choice.
The display shows a list of all registered
products.
3
Press to highlight the product to be
edited.
Press "Edit" to confirm that the product
in question is to be edited.
4
Press to highlight "Select product".
Press "Enter" to confirm your choice.
Note: The individual product can be identified
by highlighting "Identify product".
12 VELUX
®
A B C D E F G H
SYSTEM SETTINGS
Register products
B
Select products
Security key
Enter Back
AUTO SET-UP
B
Back
INFORMATION
New
B
remote control
identified. System
succesfully copied
Back
A B C D E F G H
SYSTEM SETTINGS
Register products
Select products
Security key
Enter Back
SELECT PRODUCTS
Create list
Undo list
Identify products
Enter Back
House
WINDOW
No. 1
No. 2
No. 3
Edit Back
CREATE LIST
Select product
Identify product
Save list
Enter Back
5
The display shows the list of all registered
products once again. The chosen product has
been ticked.
6
Repeat items 3-6 to edit additional products if
required. When the products to be edited have
been ticked, the list must be saved.
Press "Edit".
7
Press to highlight "Save".
Press "Enter" to confirm your choice.
8
The display shows that the list has been saved.
Note: The individual products can be identi-
fied by highlighting "Identify products".
Highlight "Undo list" to undo your choice.
When items 1-8 have been executed and
the list with products has been saved, the
interface is ready for use. The interface is
activated by pressing "Back" for more than
3 seconds or by waiting 2 minutes. After this
the display shows that the interface is active.
HOUSE
WINDOW
No. 1
No. 2
No. 3
Edit Back
HOUSE
WINDOW
No. 1
No. 2
No. 3
Edit Back
CREATE LIST
Select product
Identify product
Save
Enter Back
INFORMATION
List saved
SELECT PRODUCTS
Create list
Undo list
Identify products
Enter Back
INFORMATION
Interface
active
VELUX 13
®