Bimar JFD-121 Notice D'instructions page 16

Floor-standing fan (consisting of: base, lower column and motor body)
Press the (A) button on the base
pin and insert the lower column
correctly at the bottom (B), so
that the hole and the button
line up (you will hear a click
when they are
connected).
Table fan (consisting of: base and motor body)
Press the (A) button on the base
pin and insert the column of the
motor body correctly at the
bottom (B), so that the hole and
the button line up (you will hear
a click when they are properly
connected).
Press the (A) button on
the lower column and
insert the column of the
motor body correctly at
the bottom (B), so that
properly the hole and the button
line up (you will hear a
click
properly connected).
when they are