Initial Setup - TD Systems K32DLM7H Manuel Utilisateur

Settings

Initial Setup

1. Connecting your TV on the poweroutlet;
2. Press the POWER button on the remote to turn on the TV in green for the LED light.
CAUTION:Always disconnect the TV from the power outlet when the TV will
not be used for a long period of time. The POWER button on the front panel is only
used for switching the TV into standby, it does not disconnect the device from the
main voltage. To completely disconnect the main voltage, please remove the power
plug from the socket.
3. Press the key▼/▲/
NOTE:
The picture is for reference only.
NNECT EXTERNAL ANTENNA TO UNIT
Install external antenna into antenna jack for best picture.
Power plug
of antenna
amplifier
/ and following the picture as bellow to operate the subject.
Indoor
antenna
amplifier
Antenna
Outdoor
antenna
amplifier
75 OHM
antenn
plug