Fein WSG8-115 Série Mode D'emploi page 20

OBJ_BUCH-0000000224-002.book Page 20 Tuesday, February 23, 2016 10:09 AM
en
20
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the auxiliary handle
(figure 3).
Depending on the working manner, screw
the auxiliary handle right or left on the power
tool.
Mounting the wheel guard (figure 4).
For all work except for cut-off
WARNING
grinding.
Insert the wheel guard ensuring that the cams
of the opening engage in the grooves on the
power tool.
Press the clamping lever and turn the wheel
guard to the required working position.
Allow the clamping lever to engage.
Fig. 3
Auxiliary handle
Fig. 4
Wheel guard
1.
1.
2.
3.
2.