AFG 7.3AU Manuel Du Propriétaire page 18

7.3AU ASSEMBLY STEP 3
7.3AU
11
10
F
C
B
12
2
18
AFG14_7.3AR_AU_OM_r1_5.indd 18
HARDWARE FOR STEP 3
PART TYPE
F BOLT
B FLAT WASHER
C SPRING WASHER
A Open HARDWARE FOR STEP 3.
B Slide CONSOLE MAST GROMMET (10) from the
bottom up the CONSOLE MAST (11).
C Attach CONSOLE CABLES (12) and carefully tuck
all cables into BIKE FRAME (2). Slide CONSOLE
MAST (11) into BIKE FRAME (2).
D Attach the CONSOLE MAST (11) using 4 BOLT
(F), 4 SPRING WASHERS (C) and 4 FLAT
WASHERS (B) from the rear.
E Slide CONSOLE MAST GROMMET (10) down
over BIKE FRAME (2).
NOTE: Be careful not to pinch any wires
while attaching the console mast.
QTY
4
4
4
5/12/14 11:13 AM