AFG 7.3AU Manuel Du Propriétaire page 15

7.3AR ASSEMBLY STEP 6
20
AFG14_7.3AR_AU_OM_r1_5.indd 15
18 17 12
H
B K
19
HARDWARE FOR STEP 5
PART TYPE
K BOLT
B FLAT WASHER
H NUT
A Open HARDWARE FOR STEP 6.
B Place SEAT BACK BRACKET PLATE (17) on the
inside of the mesh seat back mount. Align mesh
SEAT BACK (18) to SEAT BACK BRACKET (12).
C Attach mesh seat back to seat back bracket using
3 BOLTS (K) and 3 FLAT WASHERS (B) from the
rear and 3 FLAT WASHERS (B) and 3 NUTS (H)
on the other side of the seat back bracket plate.
D Attach SEAT CABLE (19) as shown. Plug in
POWER ADAPTER (20) as shown.
7.3AR ASSEMBLY COMPLETE!
QTY
7.3AR
3
6
3
15
5/12/14 11:13 AM