Charger Mounting - GreenWorks ELITE C-220 Guide D'utilisation

OPERATION

CHARGER MOUNTING

1. This charger can be installed hanging on a wall using two #8 screws (not included).
2. Locate the placement for the charger to be wall mounted.
3. If fastening to wood studs use 2 wood screws (not included).
4. C-220: Drill two holes 2 3/8 in. on center ensuring they are level.
C-400: Drill two holes 5 3/4 in. on center ensuring they are level.
5. If fastening to drywall use wall anchors (not included) and screws to secure the charger to the
wall.
6. This power unit is intended to be correctly orientated in a vertical or floor mount position.
C-220
Note: If the battery and the charger won't be used for a long time, remove the battery from the
charger and pull out the ac power plug.
C-400
9