Checking That Your Oven Is Operating Correctly; Cooking/Reheating; Using The Start And +30 Sec Button; Using The Stop/Cancel Button - Samsung CM1089A Mode D'emploi

cHEckING THaT yoUr ovEN IS opEraTING
corrEcTLy
The following simple procedure enables you to check that your oven is
working correctly at all times.
First, place a bowl of water on the ceramic plate.
Then, close the door.
1. Select the power level by pressing the power
Level ( ) button once or more time.
2. Select the cooking time by pressing the Number
buttons as required (Max : 30 min.).
Press Start ( ) button.
result : The oven heats the water for 4 or 5
minutes. The water should then be boiling.
The oven must be plugged into an appropriate wall socket. The ceramic
plate must be in position in the oven. If a power level other than the
maximum is used, the water takes longer to boil.
auto energy saving function.
If you do not select any function when appliance is in the middle of setting
or operating with temporary stop condition, function is canceled and the
display will be turned off after 10 minutes.
Oven Lamp will be turned off after 5 minutes with door open condition.

cookING/rEHEaTING

The following procedure explains how to cook or reheat food.
aLWayS check your cooking settings before leaving the oven unattended.
First, place the food in the centre of the ceramic plate. Then, close the door.
1. Select the power level by pressing the power
Level ( ) button once or more time.
2. Select the cooking time by pressing the Number
buttons as required (Max : 30 min.).
result : The oven light comes on.
Never switch the microwave oven on when it is
empty.
CM1089A_XEU_DE68-03310E_EN.indd 13

USING THE STarT aNd +30 SEc bUTToN

This button offers a convenient way to heat food in 30 seconds increments
at the High power level.
1. Press the +30s ( ) button once for each 30 sec. Press Start (
button.
For example, press +30s (
one minute. The time will display, and press Start (
) button.
2. Add Seconds to a program in progress by pressing
the +30s ( ) button for each 30 sec. you want
to add.

USING THE STop/caNcEL bUTToN

The Stop/cancel ( ) button allows you to clear instructions you have
entered. It also allows you to pause the oven's cooking cycle, so that you
can check the food.
1. To pause the oven during cooking, press Stop/
cancel ( ) button once.
2. To restart, press Start ( ) button.
To correct a mistake you have just entered, press Stop/cancel (
button once, then re-enter the instructions.
To cancel cooking setting during cooking, press Stop/cancel (
button twice.
13
) button twice for
3/20/2013 3:17:21 PM
)
)
)