Installation; Installation Tips And Warnings; Installation (Indoor/Outdoor) - Lorex LNZ32P4 Série Manuel D'instructions

Masquer les pouces Voir aussi pour LNZ32P4 Série:

Table des Matières

Les langues disponibles

Installation

• Camera is rated for outdoor use. It is recommended to install the camera in a sheltered

area, such as under the eaves on a roof.

• Use the included wall mounting bracket for wall installation.

Otherwise, the camera image will be sideways. You can also refer to the included

installation diagram guide for wall mounting instructions.

• Camera is capable of seeing in low light conditions (0.1 Lux), but it cannot see in total

darkness.

NOTE

It is recommended to install the camera where there is some ambient light (for example, street lighting

or starlight, moonlight, etc.) or leave some lighting on in the area where the camera is installed.

• Mount the camera in a location that can support the camera weight.

• Mount the camera where the lens is away from direct and intense sunlight.

• Plan your cable wiring so that it does not interfere with power lines or telephone lines.

• Ensure you adhere to local building codes.

• Ensure that the camera wiring is not exposed or easily cut.

• Mount the camera in an area that is visible but out of reach.

NOTE

This camera is suitable for ceiling mounting. Wall mounting requires included wall mount.

The camera includes all necessary components for ceiling mounting and wall mounting.

For full instructions on each type of mounting, see 4.2.1 Wall Mounting or 4.2.2 Ceiling

Mounting.

Before installing the camera, decide whether to run the cables through the wall / ceiling

(drilling required) or along the wall / ceiling. If you run the cables along the wall / ceiling,

you must run the cable through the cable notch on the dome camera base. This will keep

the dome camera base flush to the ceiling when mounted.

#LX400075; r.34407/34407; en-US

Table des Matières

Table des Matières