ALDEN Onelight 65 Guide D'installation page 45

ALDEN warranty
The Alden warranty covers:
This product is warranted by SAS Alden to be free of manufacturing faults for two years from the date of purchase of
the buyer. To benefit from this warranty, you MUST keep the invoice corresponding to the purchase of this product.
Warning: Do not attempt to interfer on the product without a written agreement from Alden: if you still decide to do
so, the warranty will be void. Nor the retailer, nor the end user will be able to demand compensation of any kind
whether it be for remounting, demounting or not been able to use the vehicle for less than 30 days. SAS Alden can
not be held responsible for incidence or damage of any kind if they are due to a non conform installation following
the strict recommendations by SAS Alden. We remind you that all electric installation must be protected with an
adapted fuse.
In general, the installation and mounting must be done following strict regulation. The end user and retailer must be
held informed about rules and regulations (for example traffic rules, maximal vehicle charge) and follow mounting
instructions. If these instructions are not followed, the warranty will be void.
Nevertheless, the warranty will cover manufacturing faults.
Warning: SAS Alden decides to apply the warranty and authorizes the return of the product before hand. The
potential return remains at the full charge of the «sender» (customer: when returned to Alden; Alden: when returned
to customer). If you demand Express delivery, the costs remain yours.
Warranty exclusions:
- the replacement of consomables and wearing parts;
- this warranty does not apply to defects or damages arising by use of the product in other than normal or by
installation or use of the product other than in strict accordance with the instructions contained in the
owner's manual;
- breakdowns related to accessories or non conform installation;
- faults and consequences due to alteration caused by a non assigned installer;
- faults and consequences caused by non conform utilisation (the product has a specific role and can not be
used for any other matter);
- faults and consequences linked to external causes.
ALD-10764 45