Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Warning before installation
Protect the 3 cables (motor, skew and coax) with rubber grommets when installing through holes, walls and
cavities.Also protect the end of each cable with papertape during installation.
You MUST use the provided cables, without cutting nor modifying them. If not, the warranty will become void.
Do not use the existing coax cables in the vehicle, as the quality of the reception can be altered. Each joint or
different types of cables may weaken the quality of reception signal.
You must install separate cables, with a 5Amp fuse on the positive line, directly from the battery cell to the S.S.C.
Search module.
You must install separate cables, with a 5Amp fuse on the + (positive) after ignition line, directly from the ignition
key (of the motorhome or tow vehicle) to the S.S.C.
You must install separate cables, with a fuse on the positive line, directly from the battery cell to the receiver. Refer
to the instructions of the receiver.
Always make sure the customer will be able to access the switch off/on the AIO/receiver if the vehicle is not used
over winter.
Never use the plus after ignition on the fridge, steps or any other devices.
By switching the satellite system at the main supply, you will be able to save energy. (0,8A per day)
34
Search module.
®
®
ALD-10764
Publicité
Table des Matières
