ALDEN Onelight 65 Guide D'installation page 36

C. Controlling the rotation area (presence / absence of obstacles).
Important : To check the rotation area, open all the roof vents.
1. Install the unit on the roof on the chosen location, the LNB has to be folded towards the back of the vehicle.
2. By using a pencil, mark the location of the unit, then remove the unit.
3. Mark the center of the drawing.
4. Cut a piece of string of 60 cm long. Place one end at the center of the drawing. Stretch the string of 60
cmand bring it round (a complete circle) to make sure no obstacle is in the way when the dish will rotate.
5. If no obstacle is in the way, proceed with the glueing; if not, change the location of the satellite system and
start the same procedure as in step 4.
D. Gluing.
IMPORTANT INFORMATION CONCERNING SIKA'S PRODUCTS :
Sikaflex -512 Caravan is a single component hybrid sealant PU based on silane-terminated polymers. It cures
®
on exposure to atmospheric moisture to form a durable elastomer. Sikaflex
in accordance with quality assurance rules ISO 9001 and 14001 and the «Responsible Care» program.
Expiration date are indicated as following: month/year. Example : 03/09 corresponds to March of the year
2009.
Warning: May cause sensitization by inhalation. Do not breathe gas/fumes/vapour/spray. In case of accident
or if you feel unwell, seek medical advice immediatly (show this document where possible).
Warning: ALDEN SAS Services declines all responsability if these instructions are not respected.
Carefull: During the drying time, the vehicle must stay parked once you have glued the unit.
Attention:
• Only the supplied gluing kit answers the ALDEN SAS Services security requirements.
• Inform the customer of the dangers in case of strong winds. Only start the vehicle once the unit is
folded down.
• The warranty will become void if these rules are not respected.
36
Xn
methylenediphenyl diisocyanate
-512 Caravan is manufactured
®
ALD-10764