Technical Specifications; Care And Maintenance - Unito SPARKLE Mode D'emploi

GB
PRODUCT SAFETY PRECAUTIONS
Read this document before installing and operating this product.
Users are required to be familiar with all the information and
applicable standards prior to installing and using this product.
This manual should be saved for future reference and use.
Ambient conditions requirements: Relative humidity:
Ÿ
25%~90%; Storage temperature: -20°C to 60°C(-4°F to
140°F); Operation temperature: 4°C~50°C(39.2°F to 122°F).
Do not install the unit near heat sources or an open fire. Unit
Ÿ
environment should be well-ventilated.
Inform people who are unfamiliar with the UNTIO SPARKLE
Ÿ
smart water system about safe use, incorrect use may result
in injury.
Consult a UNITO service technician if the water system does
Ÿ
not operate normally when you have followed the instructions
in this manual.
The sparkle system is only suitable for indoor use.
Ÿ
The sparkle must be placed in an upright position. Installation
Ÿ
of sparkle is not permitted in frost room. For optimal cooling
performance, the system require a 6 hours rest time after the
installation.
A filter can be fitted in order to filer, filter the content of the
Ÿ
water for hygiene reason and extending the product,s lifetime.
Filter can be ordered online at the website
http://www.unitostore.com.
Do not attempt to repair this product yourself. Always get a
Ÿ
UNITO qualified service technician to carry out adjustments or
repairs.
Whenever a power cord is used, it should be certified by local
Ÿ
and national standards and used under guidance of an
authorized technician.
The UNITO SPARKLE water system may only be installed
Ÿ
according to the instructions in this manual. Incorrect
installation of the unit may cause damage to property. Do not
use any extension hoses other than those supplied with the
unit or supplied by UNITO.
The power supply cord is used to connect and disconnect the
Ÿ
unit from power. Ensure that the socket outlet and control
knob are accessible after installation.
Overloaded AC outlets, extension cords, and broken plugs
Ÿ
are extremely dangerous. They may result in electrical shock
or fire hazard. Call an authorized service technician for any
replacements.
Hands must be dry when plugging the power cord in or out of
Ÿ
the AC outlet to prevent electrical shock. Do not damage the
power cord by disassembling, bending, pulling or exposing it
to heat as this may cause a fire or electric shock.
Make sure to completely insert the power plug into an AC
Ÿ
outlet. Insecure connections can cause fire.
Ensure that the power source is grounded correctly. Do not
Ÿ
use extension cables and adapters between sparkle system
and power source.
This appliance can be used by children aged from 8 years
Ÿ
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
16

TECHNICAL SPECIFICATIONS

UNITO SPARKLE Smart Water System
Dispensing water types:
Ÿ
cold/hot tap water.
Tank capacity:
Ÿ
Cooling time:
25 minutes (from 25°C to 5°C @ ambient 25°C).
Ÿ
Min./Max. mains pressure:
Ÿ
System max. safety pressure:
Ÿ
Min. chilled water temperature:
Ÿ
Operation:
Ÿ
LED Indicator:
Ring LED indicator on faucet: Green/Yellow/Gyan-
Ÿ
Soda water, Blue-chilled water, White-Standby mode (light on),
Sterilization:
Ÿ
Power supply:
Ÿ
Max. power consumption:
Ÿ
Standby power consumption:
Ÿ
Safety features:
Ÿ
Dimensions:
Ÿ
Weight:
Ÿ
Flow rate:
Ÿ
Max. water hardness:
Ÿ

CARE AND MAINTENANCE

Regular maintenance of the UNITO SPARKLE smart water
system can help prevent damage or downtime. Service should
be performed by qualified and authorized personnel only.
Warning: Disconnect the power supply from the UNITO
SPARKLE smart water system before carrying out maintenance
on it.
Keep the UNITO SPARKLE smart water system in a dry,
Ÿ
clean space. Minimize exposure to dust. Plug or other
controls should never be wet.
If the unit gets wet, Disconnect it from power immediately.
Ÿ
Wait for the unit to dry completely before connect to power it
on again.
Clean exterior surfaces of the unit with a soft, lint-free cloth.
Ÿ
Never use alcohol, paint thinner, benzene or other solvents to
clean this unit. Never use an abrasive material such as a
brush or scouring pad to clean surfaces.
Always test your cleaning solution on an inconspicuous area
Ÿ
before applying to the entire surface.
Wipe surfaces clean after applying cleaner.
Ÿ
Never expose the unit to vibration.
Ÿ
Ensure that all cabin ventilation outlets are always free.
Ÿ
In the event of mechanical/power failure or damage, do not
Ÿ
attempt to repair the system unit or wires. Refer all such
problems to an authorized technician.
If the UNTIO SPARKLE smart water system needs service,
Ÿ
please consult the authorized dealer, unauthorized service
may void the warranty.
Clean aerator once a year.
Ÿ
Sparkling water, Chilled still water,
1 Liter Sparkling water, 2 Liters cold water.
2/5 bar (200/500 kPa).
Operation via Electronic control knob, handle,
220-240VAC/50Hz.
Fuse/Air relief valve.
401x220x444.7mm.
N.W:15kg
Live water:2.2 L/min @ 3bar;
10bar (1MPa).
5°C.
Manually.
130 W.
2.5 W.
G.W:19kg.
10° dH.