Easystart - Philips Sonicare ProtectiveClean 6100 Serie Mode D'emploi

Brush head mode pairing
Quadpacer
Activating or deactivating features

EasyStart

An RFID chip inside the brush head
communicates with the toothbrush handle.
When you attach a brush head, the handle
automatically recognizes the brush head and
selects the right mode and intensity level to
optimize your brushing performance.
The Quadpacer is an interval timer that has a
short beep and pause to remind you to brush
the different sections of your mouth.
Depending on the brushing mode you have
selected (see 'Brushing modes'), the
Quadpacer beeps at different intervals during
the brushing cycle.
You can activate or deactivate the following
features of your toothbrush:
- EasyStart
- Brush head replacement reminder
- Pressure sensor
To activate or deactivate these features, follow
the instructions below:
1 Put the handle on the plugged-in charger.
2 Press and hold the power on/off button
while the handle remains on the charger.
3 Keep the power on/off button pressed until
you hear a single short beep (after 2
seconds).
17
English