Resol KM2 Manuel page 38

Problem Solution
The KM2 Commu- In order to check the automatic IP address retrieval, pro-
nication module is ceed as follows:
not found by the
Î Click the Start symbol on the task bar.
DeviceDiscoveryTool.
Î In the Settings menu, select the Control panel.
Î Double-click Network connections.
Î Right-click the KM2 Communication module connec-
tion.
Î Click Properties.
Î Mark TCP/IP Internet protocol.
Î Click the Properties button.
Î Mark the Obtain IP address automatically field.
Î Mark the Obtain DNS server address automat-
ically field.
Î Close all windows by clicking OK.
Î Check if the proxy server settings for the operating
system are correct.
38
Problem Solution
The KM2 Commu- In order to check if the proxy server settings for the
nication module is operating system are correct, proceed as follows:
not found by the
Î Click the Start symbol on the task bar.
DeviceDiscoveryTool.
Î In the Settings menu, select the Control panel.
Î Double-click the Internet Options symbol.
Î Click the Connections tab.
Î Click the LAN Settings button.
Î Tick the Use a proxy server for your LAN checkbox.
Î Click the Advanced... button.
Î Close all windows by clicking OK.
Î Check if the proxy server settings for the Internet
browser are correct.
The KM2 Commu- In order to check if the proxy server settings for the
nication module is Internet browser are correct, proceed as follows:
not found by the
Î Open the Internet browser.
DeviceDiscoveryTool.
Î In the Extras main menu, select the Settings submenu.
Î In the Advanced... main menu, select the Network
submenu.
Î Click the LAN Settings button.
Î Close all windows by clicking OK.
Î Alternatively use the WLAN connection.
Signal strength of the Î Use the device in another location.
WLAN too low.
The VBus
®
The status LED is If all network settings are changed, it might occur that the
green although no con- status LED is not able to signal this change.
nection is available.
Î Restart the device.
No connection to Î If the Communication module is connected via WLAN
VBus.net possible. and LAN and if one of the connection is then discon-
nected, restart the device.
Î Use one connection type only.
cable can be extended to up to 50 m.