Iiyama AS4637UT Manuel De L'utilisateur page 21

Video Input
Video input is not selected automatically from D-Sub or DVI input. Switch to video input by "Signal
Select" on OSD Menu or the Input Button. Under the power management mode, "Signal Select" page
is displayed directly by pressing the Menu Button when the Menu is not displayed.
Menu : 1
(Video)
Adjustment Item
Brightness *
Contrast * 1
Color
Hue
Sharpness
Color Temp.
Return to Menu
1
* Adjust the Brightness and Contrast so that the picture is displayed naturally in Video Input mode.
Direct
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations.
l Brightness: Press the Brightness Button when the Menu is not displayed.
l Contrast:
Press the Contrast Button when the Menu is not displayed.
NOTE SWITCHING BRIGHTNESS / CONTRAST ADJUSTMENT
To switch between Brightness and Contrast adjustments, press the Menu Button within 10
seconds after pressing the Brightness Button or the Contrast Button during the direct
adjustments above.
H: 15 .1 K H z V : 6 0 .0 H z
NT S C
Direct
1
Direct
M e n u : 1
Problem / Option
Too dark
Too bright
Too dull
Too intense
Too weak
Too strong
Purplish
Greenish
Too soft
Too sharp
Reddish white
Bluish white
Highlight "Menu : 1" again.
Button to Press
OPERATING THE MONITOR 15