3M Demi-Masque réutilisable Mode D'emploi page 107

An
Please read these instructions in conjunction with the
appropriate 3M™ Filter Leaflet and with the 3M™ Face
Piece Reference Leaflet where you will find information
on:
SYSTEM DESCRIPTION
These products meet the requirements of EN
Reference Leaflet) to form a filtering apparatus for
surrounding atmosphere.
^ WARNINGS AND LIMITATIONS
statements where indicated.
^ WARNINGS
- Replaced when necessary.
^ Proper selection, training, use and
appropriate maintenance are essential in order
for the product to help protect the wearer from
certain airborne contaminants. Failure to follow
all instructions on the use of these respiratory
protection products and/or failure to properly
wear the complete product during all periods of
exposure may adversely affect the wearer's
health, lead to severe or life threatening illness
or permanent disability.
regulations, refer to all information supplied or
contact an occupational hygienist, safety
accessories listed and within the usage conditions
only with original 3M spare parts.
procedures for specific details.
may apply their own limits on oxygen deficiency.
oxygen-enriched atmospheres.
atmospheric contaminants/concentrations which
against contaminants/concentrations which
generate high heats of reaction with chemical filters.
contact 3M.
^ Do not use with beards or other facial hair
that may inhibit contact between the face and
the product thus preventing a good seal.
distress occurs. c) You smell or taste contaminants
on the use of filters depending on the filter class and
the facepiece used. Use of any 3M™ Face piece /
Hygienist.
PREPARATION FOR USE
UNPACKING
ensure all components are present.
Inspection
The following inspection procedure is recommended
certain the face piece, especially the face seal area, is
106