Beko VCO 42701 AB Mode D'emploi page 7

3 Usage
3.1 Intended use
The appliance has been designed for household
use and is not suitable for industrial use.
3.2 Attaching/removing the
hose
1. To attach the hose (7), push the hose cap (6) in
the direction of arrow until it is aligned with the
housing (you will hear a click).
• Projecting parts on the hose cap should be
aligned correspondingly.
2. To remove the hose (7), press the unlocking
buttons on the sides of the hose cap (6) and pull
the hose.
3.3 Attaching/removing the
telescopic tube
1. Attach the telescopic tube (13) to the handle
(15).
2. Pull the telescopic tube (13) from the handle
(15) to remove it.
Vacuum Cleaner / User Manual
3. You can extend or shorten the telescopic tube
(13) by sliding the telescopic tube adjustment
latch (12) back and forth.
3.4 Attaching/removing the
parquet/carpet brush
1. Attach the telescopic tube (13) to the parquet/
carpet brush (11) in the arrow direction.
2. You can remove the telescopic tube (13) from
the parquet/carpet brush (11) by pulling it.
7 / EN