Eco Max Mode; Please Note The Following; Nightlight - Philips AVENT SCD565E Mode D'emploi

7.3 Eco Max mode

This baby monitor has a built-in Smart Eco mode
that automatically reduces the DECT signal from
the baby unit as the distance between parent unit
and baby unit becomes shorter. By reducing radio
transmission, it helps to save energy.
If you want to save even more energy and to stop
radio transmission, activate the Eco Max mode in
the menu of the parent unit. In this mode, the DECT
signal of the baby unit is switched off.
As soon as the baby makes a sound, the DECT signal
of the baby unit automatically switches on again.
Caution:
C
In Eco Max mode, the parent unit receives
feedback from the baby unit with a delay.
When your baby makes a sound, the baby unit
first has to reactivate radio transmission before
it can send feedback to the parent unit.

7.3.1 Please note the following:

•
Before you select Eco Max mode, make sure
that the parent unit and baby unit are within
operating range, see section 'Operating range'
in chapter 'Using the baby monitor'. In Eco
Max mode you do not receive feedback when
the parent unit is out of range of the baby
unit. You can check the link by pressing any
button on the parent unit.
•
If there is no radio transmission from the baby
unit to the parent unit in Eco Max mode, the
sound level lights on the parent unit are off. The
sound level lights go on when the baby unit
reactivates radio transmission because the baby
makes a sound above the selected sensitivity level.
•
If you want to operate the baby monitor in Eco
Max mode, make sure that the sensitivity level
is set between 1 and 3. If the sensitivity level is
set to level 4, the baby unit does not switch off
radio transmission in Eco Max mode.
7.3.2 Activating Eco Max mode
Select 'Eco Max' in the menu with the + and -
1
buttons and press OK to confirm.
When the display shows 'Turn On', press OK
2
to switch on the Eco Max mode.
The warning message 'No alert if out of range,
3
OK?' appears on the display. Press OK to
confirm.
Note:
D
The warning message scrolls across the display
twice. If you do not press OK, the parent
unit leaves the menu and the Eco Max mode
remains off.
• The Eco Max indication flashes on the
display. The 'link' light flashes green slowly
when the baby unit does not transmit any
signals to the parent unit.
• When the parent unit receives a signal from
the baby unit because radio transmission
has been reactivated, the 'link' light turns
solid green.
7.3.3 Deactivating Eco Max mode
Press the MENU button
1
Use the + and - buttons to select 'Eco Max'
2
and press OK to confirm.
When the display shows 'Turn Off ', press OK
3
to confirm.

7.4 Nightlight

This option in the parent unit menu allows you to
switch the nightlight on the baby unit on and off.
Select 'Nightlight' in the menu with the + and
1
- buttons.
15