Guarantee & Service - Philips Philishave Turbovac HQT885 Mode D'emploi

ENGLISH
12
Do not connect the appliance to the mains again after it has been
opened.
Guarantee & service
If you need information or if you have a problem, please visit the Philips
Web site at www.philips.com or contact the Philips Customer Care
Centre in your country (you will find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in
your country, turn to your local Philips dealer or contact the Service
Department of Philips Domestic Appliances and Personal Care BV.
Troubleshooting
If the suction system of the vacuum beard trimmer performs poorly or
does not work at all, check the points listed below.
1 Is the hair-collection chamber empty? (fig. 10).
We advise you to empty the hair-collection chamber after each
B
trimming session.When cutting long, dense beards it may also be
necessary to empty the hair-collection chamber during the trimming
session.
2 Is the hair-collection chamber or the filter wet?
Both parts may only be cleaned dry. If one of these parts becomes wet,
B
dry it carefully.
3 Does the flexible hair guide in front of the cutting unit jam?
(fig. 17).
The transparent hair guide needs to be flexible to be able to adjust to
B
the contours of the face. If it jams because hairs have got stuck in it,
remove the hairs carefully with the brush supplied.The flexible hair
guide should yield at the touch of a finger.
4 Do you move the appliance in the optimal direction? (fig. 4).
For the best possible cutting and suction performance we advise you to
B
move the trimmer upwards, against the direction of hair growth, making
smooth and gentle strokes.