Programming - Ebode TAKE 6 IR+RF Guide Utilisateur

[13] -/--
In connection with the numeric keys, this button allows you with some
equipment to select directly channels higher than 9. If you are in
programming mode - automatic code search - you can confirm the code.
[14] Numeric keys 0 – 9
Work the same way as your original remote.
[15] REW, PLAY, FWD, REC, STOP, PAUSE
REW (rewind)
In DVR, DVD or CD mode: This button works the same way as in your original
remote.
IN TV mode: Coloured key (Red), control of videotext or special equipment
functions.
PLAY
In DVR, DVD or CD mode: This button works the same way as in your original
remote.
IN TV mode: Coloured key (Yellow), control of fasttext or special equipment
functions.
FF (fast forward)
In DVR, DVD or CD mode: This button works the same way as in your original
remote.
IN TV mode: Coloured key (Blue), control of fasttext or special equipment
functions.
REC (record)
This key works the same way as the one on your original remote for your DVR.
In order to avoid a mistake you have to press this key twice to activate this
feature.
STOP
In DVR, DVD or CD mode: This button works the same way as in your original
remote.
IN TV mode: Coloured key (Green), control of fasttext or special equipment
functions.
PAUSE
In DVR, DVD or CD mode: This button works the same way as in your original
remote.
IN TV mode: Coloured key (Magenta), control of fasttext or special
equipment functions.
[16] AV Selection of an external source (e.g. SCART input).
[17] INFO Displays on screen information of the selected appliance (when
available).
[18] Teletext
Teletext OFF: Stop Teletext / Fasttext.
[19] Teletext
Teletext Hold: Stop page change in Teletext / Fasttext mode.
[20] LEARN
Programming button for learning the functions of your original remote
control.
See chapter 4.5, Learning codes, for information about programming these
codes.
[21] Teletext
Teletext ON: Start/stop Teletext / Fasttext.

4. Programming

To make your remote suitable for your own equipment, you have to program
it once. You can do this by entering a code, related to the brand and type
of equipment you want to control. You can program any equipment under
any MODE key. For example, if you have three videorecorders, you can
program videorecorder 1 under DVR, videorecorder 2 under AUX and
videorecorder 3 under AUDIO.
16-10-2009 6 033000=15301