Insert The Batteries; Function Of The Remote's Buttons - Ebode TAKE 6 IR+RF Guide Utilisateur

X10 Home Automation: control all electrical appliances with one remote
control
The TAKE 6 Remote has two transmitters: an infrared (IR) transmitter and a
radio frequency (RF) transmitter. This allows you to operate practically
anything. You can operate your TV, video etc. with the infrared (IR)
technology. The X10 radio frequency (RF) technology makes it possible to
operate lights and appliances from anywhere in the home.
Here are some examples of the uses of the X10 Home Automation feature:
• Dim the lights and switch them on and off while watching TV.
• Turn the coffee machine on from your bedroom when you wake up in the
morning.
• Turn your lights on at night to scare off intruders when you hear noises.
• Switch on your electric blanket before the movie ends, so you can enjoy a
warm bed once the movie is finished.
• Switch everything off with a single press of a button when you go to bed.
2. Insert the batteries (always use NEW CR2032 batteries)
1. Open the cover on the back of the TAKE 6 Remote.
2. Insert 2 CR2032 batteries, verify that they are placed correctly with the +
on the battery in the same position as marked inside the battery
compartment.
3. Close the battery compartment carefully.

3. Function of the remote's buttons

[1] POWER (On/Off)
Allows you to switch off the last selected appliance. Some appliances can
also be switched on with this button.
[2] LED indicator
The indicator light flashes when the remote is operating or lights continuously
while you are programming the remote.
[3] MUTE
Allows you to turn on/off the sound. You can control the "Mute" function of
your TV even when you are in DVR, DVD or STB mode. No need to select the
TV mode.
[4] TV, DVR, DVD, STB, AUX/ , AUDIO
These keys allow you to select the appliance you wish to control.
[5] VOLUME +/-
Allows you to control the volume. You can control the volume of your TV
even when you are in DVR, DVD or STB mode. No need to select the TV
mode.
[6] CHAN +/- or PROG +/-
Select the next or the previous channel of your TV or STB.
In DVD mode: next or previous chapter.
[7] OK Confirms menu selection.
[8] S Allows you to program your remote before the first use. It also allows you
to access to secondary functions of certain A/V appliances (Shift). Press the
S key followed by the function key you desire.
[9] Navigation Keys these buttons allow you to navigate into the menu of the
selected device (if the device you selected has such a menu)
[10] Favorite button
Program this button to remember your two most often used buttons
[11] Menu Menu On
[12] Exit Menu OFF
16-10-2009 5 033000=15301