GLOBBER MY TOO Fix Up Manuel D'utilisation page 7

1. Loosen the screw of the clamp with the Allen key provided.
2. Insert the handlebar into the stem of the fork while paying attention to the position of
the base. The vertical part of the fork should be at the front and the wide part of the
mudguard should be at the back.
1 or 2 times to start tightening WITHOUT FORCING THE SCREW and WITHOUT
BLOCKING IT (A). Repeat the process with the upper screw also making sure to NOT
FORCE or BLOCK IT (B).
5. The tightening of the screws should be progressive and successive(between 5 to 10
6. Those who do not have enough strength to tighten the screws with the Allen key
After each use make sure that the screws are tightly in place so that the handlebar
doesn't detach itself.
Adjust the height
Open the quick lock and pull the steering column until the bullet into hole then tighten
3 Positions :
• Low position: 78.5 cm
• High position: 88.5 cm
Assembling the product
Assembling the handlebar (see page 2)
3. P osition the clamp with the 2 screws on the back side of the tube
4. T urn the Allen key, which should be properly placed at the head of the lower screw,
times), so as not to damage the screws and the clamp, until they are locked in place.
provided might find that using a different tool may be easier.
the quick lock. To adjust the tightness of the quick lock, tighten or loosen the screw.
• Middle position: 83.5 cm
•
10 REASONS TO ADOPT
FIX UP
.
INNOVATIVE DESIGN
Robustness and comfort for intensive use.
USER COMFORT
High density non-slip EVA grip.
RESISTANCE
Non-folding structure therefore more resistant and adapted to daily use
by children who only rarely fold up their scooter.
PERFORMANCE AND LONGEVITY
QUALITY OF THE ROLLING PARTS
121 mm front wheel and rear wheel in transparent HQ (high quality)
on 608 ZZ ABEC 5 ball bearings.
UPGRADABLE AND PRACTICAL
Height-adjustable T-bar handlebar (precise guidance) which adapts to
QUALITY OF THE EQUIPMENT
ERGONOMICS OF THE HANDLES
more resistance.
SAFETY
Long and covered composite rear brake which allows better braking
while preserving the back wheels.
QUALITY OF THE EQUIPMENT
TOO
1
2
Revolutionary, comfortable, sturdy, efficient and maintenance free.
3
4
High quality and ultra reinforced front structure (fork, headset, bracket).
5
and HR (high rebound) PU (polyurethane), with nylon cores, mounted
6
a child's growth (3 heights with index)
7
Selection of the best material, front mudguard, double clamp.
8
Handlebar grips made from durable, for better comfort and
9
10
New design, stylish and smooth but highly resistant.
7