Motorola Solutions NNTN8234 Mode D'emploi page 8

Masquer les pouces Voir aussi pour NNTN8234:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41
Table 3: Motorola Solutions Authorized Power Supplies -
Power
Supply Kit
Number
25012022001
None
25012022002
None
25012022003
None
25012022004
None
25012022006
None
25012022007
None
25012022008
None
25012022009
None
OPERATING INSTRUCTIONS
Dual-Unit Chargers are intended for use only with the
authorized Motorola Solutions batteries and power
supplies listed in Table 1, Table 2 and Table 3 on
page 4 – 6; usage with unauthorized products may
prevent proper operation.
The battery charger will accommodate a radio with an
attached battery in the front pocket, and a battery alone in the
rear pocket. To charge a battery, use the following procedure:
(Refer to Figure 1 on page 8).
1.
Plug the round end of the power supply cord into the DC
Connector on the back of the charger.
2.
Plug the power supply into the appropriate AC outlet. The
charger LED will blink green once to indicate a successful
power-up.
support simultaneous charging
Adapter
PS,SMPS,110-240V
PS,SMPS,110-240V
PS,SMPS,110-240V
PS,SMPS,110-240V
PS,SMPS,110-240V
PS,SMPS,110-240V
PS,SMPS,110-240V
PS,SMPS,110-240V
Description
6
Destination
US/Japan/
Taiwan
EMEA
UK
China
Australia/
New Zealand
Brazil
Argentina
Korea

Publicité

Table des Matières
loading

Table des Matières