Operational Safety Guidelines - Motorola Solutions NNTN8234 Mode D'emploi

Masquer les pouces Voir aussi pour NNTN8234:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41
WARNINGS (continued)
6.
WARNING
7.
8.
To reduce risk of injury, use charger with Motorola
Solutions authorized power supplies listed in Table 2.
9.
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the
user may be required to take adequate measures.

OPERATIONAL SAFETY GUIDELINES

This equipment is not suitable for outdoor use. Use only in
dry locations/conditions.
Connect equipment only to an appropriately fused and
wired supply of the correct voltage (as specified on the
product). Disconnect from line voltage by removing main
plug.
The socket outlet to which this equipment is connected
should be close by and easily accessible.
In equipment using fuses, replacements must comply with
the type and rating specified in the equipment instructions.
Maximum ambient temperature around the power supply
equipment must not exceed 40 °C (104 °F).
Output power from the power supply unit must not exceed
the ratings stated on the product label located on the
bottom of the charger.
Make sure the cord is located where it will not be stepped
on, tripped over, or subjected to water, damage, or stress.
Do not disassemble the charger; it is not
repairable and replacement parts are not
available. Disassembly of the charger may
result in risk of electrical shock or fire.)
To reduce risk of electric shock, unplug the
charger from the AC outlet before
attempting any maintenance or cleaning.
2

Publicité

Table des Matières
loading

Table des Matières