Karaoke Function; Public Announcements; Cleaning And Maintenance - X4-TECH Bobby Joey Mode D'emploi

4. Repeat steps 2 and 3 to program up to 20 tracks.
5. Press PLAY/PAUSE (see 6.9) to start the playback of the tracks in
the programmed order.
6. Stop the programmed playback by pressing STOP (see 6.12).
7. In stop mode, press PROGRAM (see 6.14) and PLAY/PAUSE (see
6.9) afterwards, to continue the programmed playback.
8. After pressing PROGRAM (see 6.14) while in stop mode, you
can check the programmed track numbers via
(see 6.11).
9. Delete the programmed sequence by opening the CD door or
turning off the CD player via VOL/ON (see 6.17).

Karaoke function

The device is equipped with two coequal, detachable
microphones.
» Turn the device on by rotating the VOL/ON control (see 6.17)
clockwise.
» Place a CD on the center spindle with the cover faced up and
close the CD door (see 6.4).
» Press PLAY/PAUSE (see 6.9) to start the playback.
» Move the ON/OFF slide control for the microphone (see 6.5) to
the ON position.
» Adjust the microphone volume by rotating the MIC VOL control
(see 6.8) to a suitable listening level.
» Now you can start singing into the microphone together with
the music from CD.
Take care that you don't place the microphone too
close to the speaker – otherwise an acoustic feedback
(squealing from the speakers) can happen. Higher
settings of the microphone volume will result in greater
sensitivity for acoustic feedbacks.
46

Public announcements

No CD necessary. Just talk into the microphone and your voice
will be amplified by the device.
1. Just turn the device on by the VOL/ON control without a CD
inserted.
2. Slide the ON/OFF-button (see 6.5) on the microphone to the ON
position.
(see 6.10) or
3. Adjust the microphone volume by rotating the – MIC VOL
control (see 6.8) to a suitable listening level.
4. Now you can start singing or talking into the microphone.

Cleaning and maintenance

cleaning solution to clean.
Never use any abrasive or harsh cleaning agents (e.g. alcohol,
petrol or thinners) as these could damage the controls, casing or
any markings and labels found on the device.
Take care that you don't place the microphone too
close to the speaker – otherwise an acoustic feedback
(squealing from the speakers) can happen. Higher
settings of the microphone volume will result in greater
sensitivity for acoustic feedbacks.
DANGER!
Always use a soft, dry and lint-free cloth to clean the
units exterior. If the device is extremely dirty, you
can use a soft cloth dampened with water, or a mild
47