Usb Client Installation; Utility And Driver Installation - Atlantis WebShare 142WN Guide D'installation Rapide

3. USB Client installation

This section will lead you to install the driver and utility of the Wireless LAN usb
Adapter.

3.1 Utility and Driver Installation

 Insert the CD-ROM and the Auto-run program will appear (alternatively,
open a file browser and double click on the start.htm file located in the
CD directory).
 Click on A02-UP2-WN icon to select NetFly USB Home Page.
 Select DRIVER and the install wizard will begin installing the software.
Follow the install wizard instructions to complete the installation (select
Install Driver and RaLink WLAN Utility (for Vista/7) or Ralink
Configuration Tool (for XP)).
 Follow the Install Shield Wizard Instructions. Click Next to continue and
finish it.
Please plug Wireless USB Adapter into USB Slot, it will be recognized and auto
installed.
The installation program will help you to setup the Wireless LAN utility.
Do not plug USB Modem to Your PC before install drivers.
If you need to install the driver/utility manually, refer each
Windows OS to the following CD-Rom directory path: CD-
ROm:\USB\< OS>.
Windows XP/Vista/7 have its own Wireless Utility; you can
either use the utility of Windows XP/7/Vista or the provided
utility. In this case during installation please select Install
Driver Only (for
Configuration Tool (for XP).
52
7/Vista) or Microsoft Zero