Worx MAKER X WX743L Mode D'emploi page 3

Children should be supervised to ensure that they do not play with the appliance
a) A short power-supply cord (or short detachable power-supply cord) is provided to reduce
the risks resulting from becoming entangled in or tripping over a longer cord.
b) Extension cords (or longer detachable power-supply cords) are available and may be used
if care is exercised in their use.
c) If an extension cord (or a long detachable power-supply cord) is used:
1) The marked electrical rating of the detachable power-supply cord or extension cord should
be at least as great as the electrical rating of the appliance;
2) If the appliance is of the grounded type, the extension cord should be a grounding type
3-wire cord
3) The longer cord should be arranged so that it will not drape over the countertop or tabletop
where it can be tripped over, snagged, or pulled on unintentionally (especially by children).
a) Hidden areas such as behind walls, ceilings, floors, soffit boards and other panels may
contain flammable materials that could be ignited by the heat gun when working in these
locations. The ignition of these materials may not be readily apparent and could result in
property damage and injury to persons.
When working in these locations, keep the heat gun moving in a back-and-forth motion.
Lingering or pausing in one spot could ignite the panel or the material behind it.
b) IMPORTANT SAFETY INSTRUCTIONS.
READ THESE INSTRUCTIONS
EN
WARNING: Extreme care should be taken when stripping paint. The peelings, residue and
3
vapors of paint may contain lead, which is poisonous. Any pre-1977 paint may contain lead
and paint applied to homes prior to 1950 is likely to contain lead. Once deposited on surfaces,
hand to mouth contact can result in the ingestion of lead. Exposure to even low levels of lead
can cause irreversible brain and nervous system damage; young and unborn children are
particularly vulnerable.
Before beginning any paint removal process you should determine whether the paint
you are removing contains lead. This can be done by your local health department or by a
professional who uses a paint analyzer to check the lead content of the paint to be removed.
LEAD-BASED PAINT SHOULD ONLY BE REMOVED BY A PROFESSIONAL AND SHOULD
NOT BE REMOVED USING A HEAT GUN.
Persons removing paint should follow these guidelines:
1) Move the work piece outdoors. If this is not possible, keep the work area well ventilated.
Open the windows and put an exhaust fan in one of them. Be sure the fan is moving the air
from inside to outside.
2) Remove or cover any carpets, rugs, furniture, clothing, cooking utensils and air ducts.
3) Place drop cloths in the work area to catch any paint chips or peelings. Wear protective
clothing such as extra work shirts, overalls and hats.
4) Work in one room at a time. Furnishings should be removed or placed in the center of the
room and covered. Work areas should be sealed off from the rest of the dwelling by sealing
doorways with drop cloths.
5) Children, pregnant or potentially pregnant women and nursing mothers should not be
present in the work area until the work is done and all cleanup is complete.
6) Wear a dust respirator mask or a dual filter (dust and fume) respirator mask which has