Control Panel; Delay Start - Samsung DMT610 Série Mode D'emploi

CONTROL PANEL

DMT610 Series
1
DISPLAY
2
CHILD LOCK/
UNLOCK
3
SANITIZE
4

DELAY START

DMT610_DD68-00085A-02_EN_20120921.indd Sec3:9 DMT610_DD68-00085A-02_EN_20120921.indd Sec3:9
1 2 3
Displays wash information (Delay start hours, Low rinse, Child Lock/Unlock,
Sanitize).
When Low Rinse remains illuminated, there is no rinse agent in the
dispenser. Refi ll the rinse aid dispenser.
This option allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the
panel.
To activate and deactivate Child lock/unlock, hold the Child lock/
unlock button down for 3 seconds.
- When Power is On : Hold down the Child lock/unlock button for three
(3) seconds.
- When Power is Off : Push the Power button fi rst, and then hold down
the Child lock/unlock button for three (3) seconds.
The temperature rises to 162˚F (72˚C) in the fi nal rinse cycle for high
temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks when the water
temperature reaches the sanitary temperature (over 155˚F (68˚C)), and then
remains illuminated until the Sanitze option ends. When you open the door
or press the Power button, the "Sanitize" lamp turns off.
You cannot select the Delicate cycle if you select the Sanitize option.
The Sanitize feature is in accordance with NSF/ANSI standard 184
for Residential Dishwashers. Certifi ed residential dishwashers are not
intended for licensed food establishments. Your dishwasher is NSF
Certifi ed.
The cycle that is NSF certifi ed is the Heavy Cycle with the sanitize option
selected.
Delay a cycle for up to 9 hours in three-hour increments. The hour displayed
indicates the time at which the wash will start.
4
setting up your dishwasher _9
2012-09-21 2012-09-21 2:03:38 2:03:38