Storing Your Dishwasher - Samsung DMT610 Série Mode D'emploi

Middle nozzle
1. Pull the upper rack towards the front and
remove it.
2. Check whether the nozzle holes are
clogged by food particles.
3. If cleaning is needed, remove the nozzle.
4. To remove the nozzle, unfasten and
remove the nut, and then remove the
nozzle.
5. Clean the nozzle holes, re-insert the
nozzle, and then fasten the nut.
6. When fastening the nut, turn it fi rmly by
hand.
7. Check whether the nozzle is engaged
correctly by rotating it by hand.
Upper nozzle
1. Check whether the nozzle holes are
clogged by food particles.
2. If cleaning is needed, remove the
nozzle.
3. To remove the nozzle, pull out the
upper rack fi rst, unfasten the nozzle
cap by turning it counterclockwise,
and then remove the upper nozzle.
4. Clean the nozzle holes, re-insert the
nozzle, and then fasten the nozzle
cap into the ozzle by turning the cap
clockwise.
5. Check whether the nozzle is
engaged correctly by rotating it by
hand.

STORING YOUR DISHWASHER

If you need to store your dishwasher for an extended period of time, fi rst drain and disconnect it. If you
leave water in the hoses and internal components, you can damage the dishwasher.
After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit
breaker.
DMT610_DD68-00085A-02_EN_20120921.indd Sec5:21 DMT610_DD68-00085A-02_EN_20120921.indd Sec5:21
1
Cap nozzle
2
cleaning and maintaining _21
2012-09-21 2012-09-21 2:04:17 2:04:17