RADSON Digital RF Guide D'utilisation page 15

6 Installation parameters menus
Your thermostat has 1 advanced installer menus.
- In order to enter in the first menu, use the (OK)
key and go to the automatic mode
press the (-) & (+) in the same time during 5
sec.
The first parameter is displayed 01 "rF".
-
How to change the value of a parameter:
- Once the parameter is displayed, press the
(OK) key to start to blink the value, then you
can adjust it with (-) or (+) keys. Press (OK)
or
adjustments.
To exit the parameter menu, go to the parameter
number 09 "End" and press (OK).
wait few seconds to
15
, then
valid your