Installation - GNC BluRay S Manuel D'installation, D'utilisation Et De Maintenance

ENG

6. INSTALLATION

The installation of this product is simple and does not require special equipment. We recommend to install at least in two people. CAUTION to the
edges of the lamp body (plastic and aluminium) which may be SHARP.
To assemble the product proceed as follows:
Fix the terminals of the suspension cables to the ceiling with wheelbase measures of 156 mm, centrally located over the tank. Use appropriate
Stop to support the weight of the lamp. Insert the cable ends with control cylinder, with ballpoint termination, in the holes of the plexiglass lens.
Apply the clips provided to the ballpoint endings and insert the assembly into the hole of the lens by sliding back the steel cable and pressing on the
clip head.