Use Of Accessories; Use - Imetec L1105 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
EN
The hair dryer is provided with the accessories described
above.
The accessory is mounted on the appliance by pressing it
onto the front part of the hair dryer (4) until it is inserted. When
finished using it, the accessory can be removed by pulling it
firmly.
Styling nozzle (6A)
Use the styling nozzle to direct the air jet as you wish.
Diffuser (6B) (where present)
If the appliance comes with a diffuser, replace the styling
nozzle to add volume to your hair.
Recommendations:
The diffuser is only to be used on damp hair in order to obtain
a natural hair style or a natural drying effect:
Take a lock of hair and twist it in the diffuser. Make sure
that even the ends are entered.
Then switch the hair dryer on at medium speed and
maximum temperature to dry your hair.
For greater volume:
Switch the hair dryer on at minimum speed and
temperature.
Place the diffuser directly on your hair and move it from
the bottom upwards, as though you wanted to lightly
massage your scalp.
IMPORTANT: use only the original accessories of the
appliance.
Refer to the figure in the illustrative guide of the instructions
for use.
Appliance with separate keys for air flow (3A) and
temperature (3B)
The two keys set air flow and temperature separately at the
following levels:
Air flow button (3A)
0 = OFF
1 = medium air flow
2 = strong air flow
MI001463.indd 12

USE OF ACCESSORIES

USE

Temperature button (3B)
1 = low temperature
2 = medium temperature
3 = high temperature
12
09/12/2013 17:54:46

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

L1106

Table des Matières