Cleaning And Maintenance; Storage And Transport; Disposal; Technical Data - Lux Tools SW-360 Mode D'emploi

Seilzug_389828_389829.book Seite 17 Dienstag, 12. April 2016 2:35 14
– Turn the crank (5) clockwise to evenly wind up
the steel cable.
Unwinding the cable under load (lowering,
unloading)
► P. 3, item 4
– Hold the crank (5) firmly and push gently to
relieve the ratchet lever (2).
– Place the ratchet lever (2) at Position [A].
– Turn the crank anti-clockwise.
– The steel cable should be fully retracted again
after use.

Cleaning and maintenance

DANGER! In the interests of your own
safety! Perform only the maintenance work
described here yourself.
Any other work, especially repairs must be
performed by a trained professional.
Improper work can cause product damage
and hence physical injury.
Cleaning and maintenance at a glance
After each use
What? How?
► Cleaning the product –
Cleaning the product.
p. 17
Every 6 Months
What? How?
Grease axle bolt and ca- Lubricate components
ble. with standard bearing
grease

Technical data

Material number
Maximum load
Cable length
Weight
Cleaning
Cleaning the product
– Remove coarse dirt.
– Wipe down the product with a slightly damp
cloth.

Storage and transport

Storage
DANGER! Risk of injury! Make sure that
unauthorized persons do not have access
to the product!
• Store the product in the most horizontal position
possible.
Transport
– Use the original packaging to ship whenever
possible.

Disposal

Disposal of the appliance
This appliance must not be disposed of with regular
household waste! Dispose of the appliance in the
appropriate manner. For more information, consult
your community waste disposal service.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.
389 828
360 kg
10 m
2.25 kg
GB
389 829
720 kg
10 m
3.25 kg
17