Kobalt 0035546 Mode D'emploi page 12

AIR BLOW GUN :
1. Mount the female plug by hand into the air inlet. (See Figure 1)
2. The original nozzle can be removed from the blow gun when you are using
the gun for for another purpose. (See Figure 2)
3. Mount the rubber nozzle directly onto the gun for air dusting without
scratching workpieces. (See Figure 3)
4. Mount the safety nozzle onto the blow gun. (See Figure 4)
5. Mount the tapered nozzle onto the safety nozzle for mattress inflating.
(See Figure 5)
6. Mount the sports needle onto the safety nozzle for sports ball inflating.
(See Figure 6)
7. Connect air supply hose to the blow gun. (See Figure 7)
Fig. 7
12
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6