Wittkopp Multicode Manuel D'utilisation page 16

2.5 overview users
This function provides an overview of the number of free or already occupied users.
Only the master can perform this function.
Step
Press and hold the key '7' until the red LEDs flash permanently
1.
Enter your 7-digit master code e.g. 5678913
2.
Enter the user PIN that has to be checked e.g. users 3, 5, 6...
3.
End the query
4.
• Single signal = user is free or not active
• Double signal = user engaged or active
3. time delay and opening window
3.1 adjusting the time delay and opening window
Time delay 01 - 99 minutes:
time to wait until the lock can be opened.
Opening window 01 - 19 minutes:
Within this time window the master or the user can open the lock with his code.
Step
Press and hold the key '9' until the red LEDs flash permanently
1.
Enter your 7-digit master code e.g. 5678913
2.
Enter the time delay e.g. 20 minutes
3.
Enter the opening window e.g. 10 minutes
4.
Re-enter the time delay e.g. 20 minutes
5.
Re-enter the opening window e.g. 10 minutes
6.
• The time delay can be increased at any time. It can be reduced only during the opening window.
16
Action
Code input – beginning of the time delay
Wait during the time delay
Opening window – re-enter code
Action
Key
7
5678913
1,3,6
0
Key
9
5678913
20
10
20
10