Wittkopp Multicode Manuel D'utilisation page 14

user manual electronic lock Multicode
1. General
1.1 code
The lock operates with a numeric seven-digit code. A secondary code can be added. Each pressed key is confirmed
with an audio and light signal.
After entry of a valid code a double signal follows. An invalid entry is followed by a long signal. After ten seconds
without entry, an already started entry is cancelled.
1.2 opening
Enter code (factory code 1-2-3-4-5-6-7) and unlock/open the door within three seconds. If the lock is not unlocked
within three seconds, the lock secures automatically.
1.3 closing
Close the door and turn the handle fully to closing position. The lock is secured. Confirm if the lock is locked by
trying to turn the handle back in open-position.
1.4 Manipulation protection
After four consecutive wrong code inputs, a blocking time of five minutes occurs. During this blocking time the red
LED flashes every ten seconds and every input is accompanied by a long signal tone. After the blocking time has
passed two further incorrect inputs will restart the blocking time.
1.5 safety reference
All codes are to be securely stored. Do not use personal data, such as birthdays and telephone numbers as your
personal code. Change the factory code before you start using the safe!
14