Basic Playback - Pioneer VSX-1122-K Guide Rapide

Basic playback

Multichannel playback
RECEIVER ALL ZONE STBY
DISCRETE ON
RCU SETUP
BDR
BD DVD DVR
TV CD NET
2
USB CBL
iPod SAT TUNER
INPUT SELECT STATUS
INPUT
TV CONTROL
CH VOL
AUDIO
PARAMETER
TOP MENU
ENTER
HOME
MENU
iPod CTRL
FEATURES
AUTO
PHASE PQLS S.RTRV
MPX BAND
PRESET
1 2 2 2 3
SIGNAL SEL CH LEVEL
4 5 6
SPEAKERS DIMMER SLEEP
7 8 9
D.ACCESS CLASS
0
/ CLR ENTER
AUTO/ALC/
ZONE 2
DIRECT STANDARD
Z2
LISTENING MODE
RECEIVER
6
1
Switch on the playback component.
E.g.) Turn the Blu-ray Disc player connected to the HDMI
BD IN terminal on.
SOURCE
2
Switch the input of the receiver.
E.g.) Press BD to select the BD input.
HDMI
3
Press AUTO/ALC/DIRECT to select 'AUTO
ADPT
SURROUND'.
OPTION
Also press STANDARD or ADV SURR for multichannel
RECEIVER
playback. Select your preferred listening mode.
4
Start the playback component's playback.
VOLUME
5
E.g.) Start playback of the Blu-ray Disc player.
5
Use VOLUME +/– to adjust the volume level.
MUTE
Sound can be switched off by pressing MUTE button.
VIDEO
PARAMETER
Note
TOOLS
MENU
• Switch to one of the underlined devices to use the remote
control to operate that device. To operate the receiver,
RETURN first press
operate.
• The receiver's remote control can be used to operate
MCACC
not only the receiver but also a variety of other devices,
PTY
including an iPod/USB device, a Blu-ray Disc player, a TV,
etc.
TUNE
Ex.: Playing a Blu-ray Disc player
+Favorite
AUDIO
DISP
• It will take about 1 minute to be able to use the NETWORK
(internet radio and such), iPod/USB, or ADAPTER PORT
CH
from the time the power is turned on.
CH
ADV SURR
3
, then press the appropriate button to
RECEIVER
→
BD
Listening to the radio
1
Press TUNER to select the tuner.
If necessary, press BAND to change the band (FM or AM).
2
Press TUNE +/– to tune to a station.
• Press and hold TUNE +/– for about a second. The receiver
will start searching for the next station.
• If you're listening to an FM station but the reception is
weak, press MPX to select FM MONO and set the receiver
to the mono reception mode.
Saving station presets
If you often listen to a particular radio station, it's convenient to
have the receiver store the frequency for easy recall whenever
you want to listen to that station.
1
Press TOOLS while receiving a signal from the
station you want to store.
The preset number is blinking.
2
Press PRESET +/– to select the station preset
you want, then press ENTER.
The preset number stop blinking and the receiver stores
the station.
Listening to station presets
You will need to have some presets stored to do this.
 Press PRESET +/– to select the station preset
you want.